Tools
I was surprised at the few number of special tools that were required, apart
from the usual assortment of tools normally found in my toolbox were:-
- Essential tools include:-
- 1. Torque wrench.
- 2. 27mm A/F socket for crank bolt.
- 3. M6x1.0mm tap (clean out thermostat housing threads).
- 4. M7x1.0mm tap (plug type, for cleaning out waterpump threads).
- 4. M14x1.25mm (for cleaning out spark plug threads).
- 5. 15mm A/F ring spanner (exhaust manifold).
- 6. Valve spring compressor (long reach type).
- 7. Piston ring compressor.
- 8. Block and tackle.
Additional home made tools
- 1. Flywheel locking bracket, fits into starter motor apperture.
- 2. Clutch pressure plate clamps.
- 3. Engine holding frame.
- 4. Hoist 'A' frame.
- 5. Long series 30mm A/F socket modified to fit gearbox output flange nut.
- 6. Engine lifting bar.
- 7. Clutch friction plate alignment tool.
-
-
|