The Machinist
I was very happy with the work carried out, Mick gave me good advice and did not push to do un-necessary work. His prices were reasonable and he had everything ready for me when he said it would be. If anyone needs his service he will know what you're talking about.
The following table shows the charges that would currently apply (1999) + VAT
Description |
Part Ref |
Qty |
Price Ea |
Sub |
Machining Work |
||||
Weld head |
1 |
£35.00 |
£35.00 |
|
Plug Insert |
1 |
£15.00 |
£15.00 |
|
Skim Head |
1 |
£30.00 |
£30.00 |
|
De-grease block |
1 |
£10.00 |
£10.00 |
|
Skim Block |
1 |
£35.00 |
£35.00 |
|
Hone Bores |
6 |
£3.00 |
£18.00 |
|
Re-grind crank & supply new bearing shells |
1 |
£140.00 |
£140.00 |
|
Piston Rings |
6 |
£26.00 |
£156.00 |
|
Graphogen Assembly Oil |
1 |
£7.00 |
£7.00 |
|
£446.00 |
Additional to the work carried out he also quoted for other options.
Additional Quotes |
||||
Polish crank journals and supply new shells |
£98.00 |
|||
Balance crank/con-rods/pistons |
(little to be gained) |
£90.00 |
||
Rebore & supply new rings/pistons/pins |
£520.00 |
|||
